FGCZ9
(Almost) Everything you need to build your own FGCZ9!
Some fabrication / trimming is required for the firing pin and springs.
From $79.99
Barrel Options
Bolt Options
Description
| Item | Amount |
| m4x15mm screws for the top of receiver (picatinny section) | 4 |
| m4x10mm round head screws (fastening handguard to upper receiver halves) | 4 |
| m3x15mm screw (ejector hinge) | 1 |
| m4x25 screws (rest of receiver) | 8 |
| 4mmx32mm dowel pin (spring release) | 1 |
| m4x25 flat head screws (bolt asm, countersink tool required, pre-fabricated bolt will use just one for retaining the pin) | 5 |
| shaft collar for 3mm shaft, 7mm OD (for firing pin) | 1 |
| 6mm OD 1mm wire thickness spring, 8.5mm long (firing pin spring) | 1 |
| 3mmx100mm bar (firing pin stock) | 1 |
| 1/4″ OD rod, 6.5″ long (BCG spring guide rod) | 1 |
| 1/4-20 x ¾” (ar15 grip screw) | 1 |
| Compression Spring Stock, Spring-Tempered Steel, 11″ Long, 0.36″ OD, 0.266″ ID (to be trimmed to final length) | 1 |
| 10x50x66.68mm steel for bolt (3 foot stock) | 1 |
| 1×0.313×3.039in for bolt (2 foot stock) | 2 |
Reviews
There are no reviews yet.